1. Foot platform with mat for boot sole drying.
2. LCD touch screen controller.
NO | Name | Model | Person | QTY | unit | Remark |
1 | Hygiene Station Machine | HT-93510 | Single person | 1 | set | Standard |
2 | Handle | Standard | 2 | set | ||
3 | Foot board | Standard | 2 | nos | ||
4 | Container of disinfectant for hand | 5L | 1 | nos | ||
5 | Container of Soap for sole | 10L | 1 | nos | ||
6 | Container of soap for hand | 2.5L | - | nos | ||
7 | Brush | Standard | 2 | nos | ||
8 | Sanitizing tank for boot sole | 1 | nos |
Model | HT-93510 |
Original | Made in China |
Electric control | Sensors: OMRON , PLC: OMRON Power control: Weidmuller Leakage protection:Schneider |
Cleaning model/water temperature | circulate-line/cleaning with water/0-60℃ |
Cleaning type/Clean length | Roller brush 2 sets/Length1000mm |
Brush material | Nylon |
Function: | Inductive soap liquid dispenser,Hand washing, hand Drying, Hand sanitizing/Sole washing/Sole sanitizing, can pass 2-3 person each minutes. |
Disinfectant volume | 5L |
Inlet part/pressure | SS304 Solenoid valve/pressure 10KG, working pressure 3-5KGS |
Inlet connector | DN20/ 3/4" internal threaded , DN25/ 1" internal threaded |
Disinfectant volume for sole | 10L |
Water level control | ball float valve (DC24V), stainless steel 316 |
Water out way | Floor drain |
Drainage connector | DN50mm |
Start type | Start upon sensor induction, stop upon time out (30-60s) |
Soap liquid | Inductive soap liquid dispenser |
Tap for hand | Inductive hand washing |
Hand Disinfecting | Inductive spray to disinfect by 75% alcohol, nozzles: SS304 |
Tripod turnstile | Only enter after Hand disinfection |
Boot sole washing | Spray water and soap liquid on the brushes and washing the boot sole |
Boot sole sanitizing | Immersion, add Chlorine dioxide, effervescent tablets, sodium hypochlorite |
Voltage | AC220 50-60Hz,single phase |
Motor power | “ZHONGDA” |
Total power | 2250W |
Sate guard | Leakage/overload/short circuit |
Main material | SUS304 |
Size( LxWxH)mm | 2600x860x1718mm |
Weight (KGS) | 420KG |
Can be design the machine according to the functions of customer required